| BHM
Services, LLC
BHM Services, LLC founded in 1982, manufactures and markets parts and accessories
for dust collectors (baghouses) and the company's principle, Gerald (Jerry)
Reier, P.E. provides consulting and design services on equipment and systems
for air pollution control, sand reclamation and Totally Enclosed Treatment
Systems dust treatment providing service from conceptual design through
commissioning.
GMD Services, Inc. offers Performance
Based Contracts and Leases on GMD Environmental Technologies, Inc.’s
proprietary Equipment and Systems worldwide. Specific offerings include:
Foundry Sand Reclamation Performance Based Contract
for the reclamation of Excess Sand from the Foundry Molding Process which
otherwise would be disposed of as waste. In this arrangement, the Performance
Based Contract, a third party will own and operate an entire facility
on the foundry’s site, reclaiming the foundry’s spent sand,
returning it to the foundry for reuse indiscriminately in the foundry. The
foundry has minimal capital investment, agreeing only to pay a “fixed”
fee per ton price for the reclaimed sand. Contracts will vary in length
from a minimum of five (5) years to a maximum of ten (10) years.
Cupola Emission Reduction and Treatment System (CERTS)
for foundries required to meet Federally mandated Iron and Steel MACT Standards.
GMD Servcies, Inc. offers a fully comprehensive GMD Cupola Emission Reduction
and Treatment System (CERTS) on a toll basis, that is, GMD Environmental
Technologies, Inc. will design, engineer, manufacture, deliver, install
and in certain cases operate a complete emission control system beginning
at the off-take of the cupola (cross-over duct) and concluding at the I.D.
Fan Exhaust Stack. GMD CERTS can be supplied in many different designs,
each of which is dictated by the specific application or plant design into
which it is going. A system may include, but is not necessarily limited
to, a Hot Blast Recuperator for waste heat recovery; a Waste Heat Boiler
combined with a Steam Turbine Generator to produce power to send back to
the plant; a GMD Flue Gas Cooler to cool the off-gases before they enter
the GMD Baghouse; a GMD Totally Enclosed Treatment System (TETS™)
to condition or treat off-gas constituents including acid gases (HCL, SO2
, SO3 and HF), Heavy Metals (Lead, Cadmium and Chrome), dioxins
and furans; GMD Baghouses; and exhaust system including Duct, Dampers, I.D.
Fan and Exhaust Stack.
Equipment Lease / Lease – Purchase for Potentially Hazardous
Baghouse Waste for the pre-conditioning (treatment) of baghouse
waste which, without treatment, would be classified / designated characteristic
hazardous for heavy metals. In this arrangement, the Lessor, GMD Environmental
Technologies, Inc., will build and install the equipment on the customer’s
site, fully commission it and make it ready for operation. The customer
will enter into a lease with GMD Services for this equipment with a lease
term of three (3) to seven (7) years. Upon conclusion of the lease, the
customer may surrender the equipment to GMD Environmental Technologies,
Inc. or they may chose to buy the equipment.
|
